Howto ATEM Picture in Picture

From

Revision as of 15:43, 9 November 2023 by Chkummer (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Step by Step

Open the Blackmagic 'ATEM Software Control'
go to the 'Switcher' tab
Select your 'Mix Effect'
Click on your Key ('KEY 1', 'KEY 2' ...) within 'Next Transition'
navigate to 'Palettes'
Scroll down to your corresponding 'Upstream Key <Num>' and click on it if not already expanded
click on 'DVE'
on 'Fill Source' select your input source to be shown in the smaller picture
Enter values for 'Position' and 'Size' (you may use mouse/touchpad click and move left/right to scroll). Good starting values are
- Top Left: Position X: -10.00 / Position Y: 6.00 / Size X: 0.25 / Size Y: 0.25
- Top Right: Position X: 10.00 / Position Y: 6.00 / Size X: 0.25 / Size Y: 0.25
- Buttom Left: Position X: -10.00 / Position Y: -6.00 / Size X: 0.25 / Size Y: 0.25
- Buttom Right: Position X: 10.00 / Position Y: -6.00 / Size X: 0.25 / Size Y: 0.25
Click on 'ON AIR' above your ('KEY 1', 'KEY 2' ...) within 'Next Transition'

Links

Using Picture in Picture with Your ATEM Switcher on Blackmagicdesign YouTube Channel

Retrieved from "https://www.wiki.kummers.org/index.php?title=Howto_ATEM_Picture_in_Picture&oldid=1133"